Wird Wasserstoff den Koks in der Stahlerzeugung ersetzen?

Answer

H2-DRI ist im Pilot-/ersten kommerziellen Maßstab erprobt (HYBRIT). Die Wirtschaftlichkeit hängt am Preis für grünen Wasserstoff; die meisten Roadmaps setzen die breite Einführung in die 2030er — CBAM und der Auslauf der kostenlosen Zuteilung sind darauf ausgelegt, genau diese Brücke zu finanzieren.

From our guide: Dekarbonisierung von Stahl — full context, charts and sources there.

Calculate your carbon bill →Read the full guide

People also ask

Wie wird die CO2-Zahl berechnet?

Wie wird der CBAM-Zertifikatspreis festgelegt?

Wie wird das berechnet?

Wie schmutzig ist grauer Wasserstoff?

Wie hoch wird der EU-CO2-Preis 2030 sein?

How this page is built: heat-loss figures follow ASTM C680 / ISO 12241 (the method behind our public calculators); facility emissions from Climate TRACE & EU ETS verified data across 30,000+ industrial sites; the 2026–2034 schedule is Regulation (EU) 2023/956, not a forecast. Published by Inzonex — manufacturer of modular removable insulation (UK Patent GB2508992.1). Spotted an error? Tell us — we correct on evidence.

Inzonex removable modular insulation on industrial equipment

Cut the tonnes at the source

Hot industrial equipment? Cut the heat loss.

Boilers, kilns, heat exchangers, valves and steam lines lose energy continuously. Inzonex makes patented (UK GB2508992.1) removable modular insulation — snap-fastened covers engineered per temperature tier, not generic off-the-shelf jackets:

Up to 96% less heat loss from insulated surfaces
Surface temperature ≤45 °C — touch-safe for workers (EN ISO 13732-1)
6× faster maintenance access than fixed cut-and-weld lagging — unclips and refits in minutes, no destruction
Inspectable — comes off to check for corrosion under insulation, then refits like-new (generic jackets often don't survive removal)
Typical payback up to 2 years

See Inzonex process-equipment insulation →Run the savings study

Every tonne you stop emitting is a tonne you don't have to report: cutting heat loss is a measurable, auditable Scope 1 reduction that flows straight into EU ETS, CBAM and your ESG / CSRD disclosures — not an offset, an actual emission cut.