Inzonex Carbon Hubpowered by inzonex.co.uk
Question

Methodik & Quellen (vor dem Zitieren lesen)

Answer

Methode. Jede Maßnahme wendet ihre veröffentlichte Einsparungsbandbreite auf die relevante ENERGIE-Basis (MWh) an, nicht auf einen Geldwert — das primäre Ergebnis ist also preisunabhängig. Geld = eingesparte MWh × Ihr €/MWh; CO₂ = eingesparte MWh × Ihr Emissionsfaktor. Bandbreiten: Dämmung 2–5 % des Brennstoffs (Begehungspraxis; Reduktion pro Oberfläche ≈90 % nach ASTM C680); Dampfprogramm 5–12 % des Brennstoffs (DOE/LBNL wirtschaftliches Potenzial 18–20 % der Kessel Energie — konservativer Anteil am Gesamtbrennstoff angesetzt); Abwärmerückgewinnung 3–8 % des Brennstoffs (DOE 2008: 20–50 % des Energieeinsatzes als Wärme verloren, rückgewinnbarer Anteil standortspezifisch); Druckluft 2–5 % des Stroms (DOE/Energy Star: Leckagen 20–30 % der Kompressorleistung; Druckluft ≈10 % des Industriestroms); VSDs 3–8 % des Stroms (DOE: 20–50 % an betroffenen Antrieben); LED 2–6 % des Stroms (50–60 % der Beleuchtungsenergie; Beleuchtung 5–30 % des Anlagenstroms); Wasser 10–30 % des Wasserverbrauchs (Envirowise/WRAP-Auditpraxis). „Gewartete Anlage“ multipliziert die Bandbreiten mit 0,4–0,5 (Annäherung an den Idealzustand).

Einheitenumrechnungen (zum Abgleich mit jeder anderen Quelle): 1 MWh = 1.000 kWh = 3,6 GJ ≈ 3,41 MMBtu. €50/MWh = €0,05/kWh = €14,65/MMBtu. Erdgas 0,183 t CO₂/MWh = 0,0507 t/GJ; Kohle ≈0,34 t/MWh; EU-Netzstrom ≈0,20–0,30 t/MWh (2024, fallend). Dies sind Screening-Werte zur Priorisierung, keine Garantien — für berichtsfähige Zahlen pro Maßnahme verwenden Sie den Carbon-Savings-Certificate.

From our guide: Universeller industrieller Einsparungsrechner — full context, charts and sources there.

Related questions

People also ask

How this page is built: heat-loss figures follow ASTM C680 / ISO 12241 (the method behind our public calculators); facility emissions from Climate TRACE & EU ETS verified data across 30,000+ industrial sites; the 2026–2034 schedule is Regulation (EU) 2023/956, not a forecast. Published by Inzonex — manufacturer of modular removable insulation (UK Patent GB2508992.1). Spotted an error? Tell us — we correct on evidence.
Inzonex removable modular insulation on industrial equipment
Cut the tonnes at the source

Hot industrial equipment? Cut the heat loss.

Boilers, kilns, heat exchangers, valves and steam lines lose energy continuously. Inzonex makes patented (UK GB2508992.1) removable modular insulation — snap-fastened covers engineered per temperature tier, not generic off-the-shelf jackets:

  • Up to 96% less heat loss from insulated surfaces
  • Surface temperature ≤45 °C — touch-safe for workers (EN ISO 13732-1)
  • 6× faster maintenance access than fixed cut-and-weld lagging — unclips and refits in minutes, no destruction
  • Inspectable — comes off to check for corrosion under insulation, then refits like-new (generic jackets often don't survive removal)
  • Typical payback up to 2 years

Every tonne you stop emitting is a tonne you don't have to report: cutting heat loss is a measurable, auditable Scope 1 reduction that flows straight into EU ETS, CBAM and your ESG / CSRD disclosures — not an offset, an actual emission cut.

Source: Inzonex Carbon Hub — inzonex.co.uk/carbon · prices dated as shown on each figure · schedule per Regulation (EU) 2023/956 · indicative analytics, not compliance advice.