Coal power plant in Wyoming, United States of America. Approximate location 44.287911, -105.383969.
CoalWyomingUnited States of Americasubcritical
Wyodak Power Plant is a 402.3 MW coal power station in Wyoming, United States of America. It is operated by PacifiCorp [80%]; Black Hills Power Inc [20%]. Based on its capacity (estimated), it can supply roughly 503k homes (estimated). It ranks #1426 of 10,938 United States of America power plants by installed capacity. Commissioned in 1978, it is around 48 years old — long-established. In context, coal supplies about 16.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_wyodak_unite.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000104291; fuel: GEM GCPT
At 402.3 MW, Wyodak Power Plant is below the median coal plant in United States of America (558 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by PacifiCorp [80%]; Black Hills Power Inc [20%].
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a cold semi-arid steppe climate (Köppen BSk) — Northern Hemisphere, latitude 44.3°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 71% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 87/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #465 largest coal power plant of 802 in United States of America by capacity.
United States of America has 802 coal power plants in this dataset, together about 621,194 MW of capacity.
Coordinates 44.287911, -105.383969 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Wyodak Power Plant is a 402.3 MW coal power plant in Wyoming, United States of America, commissioned in 1978.
Its output is enough to supply roughly 503,449 homes (estimated).
Wyodak Power Plant is operated by PacifiCorp [80%]; Black Hills Power Inc [20%].
