Wind power plant in Hawaii, United States of America. Approximate location 21.681, -157.975.
WindHawaiiUnited States of America
Kahuku Wind Power LLC is a 30 MW wind power plant in Hawaii, United States of America. It is operated by First Wind O&M LLC. Based on reported annual generation of 54 GWh, it can supply roughly 15k homes. It ranks #4301 of 10,938 United States of America power plants by installed capacity. Commissioned in 2011, it is around 15 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 10.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0057087.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000906554); fuel: WRI source-record fuel
At 30 MW, Kahuku Wind Power LLC is below the median wind plant in United States of America (68 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by First Wind O&M LLC. All plants by this company →
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a tropical rainforest climate (Köppen Af) — Northern Hemisphere, latitude 21.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #714 largest wind power plant of 1139 in United States of America by capacity.
United States of America has 1139 wind power plants in this dataset, together about 104,873 MW of capacity.
Coordinates 21.681, -157.975 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Kahuku Wind Power LLC is a 30 MW source-record wind power plant in Hawaii, United States of America, commissioned in 2011.
Kahuku Wind Power LLC generates about 54 GWh of electricity per year.
Its output is enough to supply roughly 15,485 homes.
Kahuku Wind Power LLC is operated by First Wind O&M LLC.
