Gas power plant in State of Mexico, Mexico. Approximate location 19.645741, -99.182501.
GasState of MexicoMexicoCCGT · HRSGConstruction
Jorge Luque power station is a 1,660 MW gas power station in State of Mexico, Mexico. It is operated by Generadora Fénix SAPI de CV [100%]. Based on its capacity (estimated), it can supply roughly 1.9 million homes (estimated). It ranks #5 of 366 Mexico power plants by installed capacity. In context, gas supplies about 61.6% of Mexico's electricity; the national grid averages 474 gCO₂/kWh (25.9% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_jorgeluque_mexico.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GOGPT; fuel: GEM GOGPT
At 1,660 MW, Jorge Luque power station is well above the median gas plant in Mexico (368 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Its current lifecycle status is “Construction” — so it is not yet, or no longer, generating at full output. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Generadora Fénix SAPI de CV [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a subtropical highland climate (Köppen Cwb) — Northern Hemisphere, latitude 19.6°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #2 largest gas power plant of 129 in Mexico by capacity.
Mexico has 129 gas power plants in this dataset, together about 58,538 MW of capacity.
Coordinates 19.645741, -99.182501 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Jorge Luque power station is a 1,660 MW gas power plant in State of Mexico, Mexico.
Its output is enough to supply roughly 1,869,634 homes (estimated).
Jorge Luque power station is operated by Generadora Fénix SAPI de CV [100%].
