Cenal power station is a 1,320 MW coal power station in Çanakkale, Turkey. It is operated by Cenal Elektrik AŞ [100%]. Based on its capacity (estimated), it can supply roughly 1.7 million homes (estimated). It ranks #44 of 502 Turkey power plants by installed capacity. Commissioned in 2017, it is around 9 years old — relatively modern. In context, coal supplies about 34.3% of Turkey's electricity; the national grid averages 475 gCO₂/kWh (43.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_cenal_trkiy.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000103636); fuel: GEM-coal source-record fuel
At 1,320 MW, Cenal power station is well above the median coal plant in Turkey (630 MW). Technically it is described as ultra-supercritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Cenal Elektrik AŞ [100%].
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a hot-summer Mediterranean climate (Köppen Csa) — Northern Hemisphere, latitude 40.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 25% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 40/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #28 largest coal power plant of 184 in Turkey by capacity.
Turkey has 184 coal power plants in this dataset, together about 147,855 MW of capacity.
Coordinates 40.4167, 27.31829 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Cenal power station is a 1,320 MW source-record coal power plant in Çanakkale, Turkey, commissioned in 2017.
Its output is enough to supply roughly 1,651,885 homes (estimated).
Cenal power station is operated by Cenal Elektrik AŞ [100%].
