Vischer Ferry

Hydro power plant in New York, United States of America. Approximate location 42.8075, -73.8427.

HydroNew YorkUnited States of America

Vischer Ferry is a 12 MW hydro power plant in New York, United States of America. It is operated by New York Power Authority. Based on reported annual generation of 66 GWh, it can supply roughly 19k homes. It ranks #5492 of 10,938 United States of America power plants by installed capacity. Commissioned in 1958, it is around 68 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 5.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).

12Source-backed capacity
66GWh reported / yr
18,742homes powered
1958commissioned (~68 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0002686.

Data status

Known data

FacilityVischer Ferry WRI
CountryUnited States of America · New York WRI
Coordinates42.8075, -73.8427 WRI
FuelHydro WRI
MW installed capacity12 MW WRI source record; scope not independently normalised
OwnerNew York Power Authority WRI
Commissioned1958 WRI
GWh reported / yr66 GWh/yr WRI

Calculated from dataset

Capacity rank in country#5492 of 10938 calculated
Fuel-specific rank in country#614 of 1449 calculated
Capacity vs country/fuel peers1.45× · 8 MW median · 1449 peers calculated
Homes-powered equivalent18,742 calculated from reported generation
Climate8.9°C · HDD 3,572 derived from coordinates
Environmental severityC2 · 31/100 derived from coordinates

Not available

TechnologyNot available not in dataset
GWh reported / yrNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.

capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel

In context: how this plant compares

At 12 MW, Vischer Ferry is well above the median hydro plant in United States of America (8 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Reported generation trend

2013: 45 GWh20132014: 50 GWh20142015: 27 GWh20152016: 29 GWh20162017: 50 GWh20172018: 64 GWh20182019: 66 GWh201966 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by New York Power Authority. All plants by this company →

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 42.8°N — which shapes how much energy it can produce and how its output varies through the year.

8.9°Cannual mean temp
3,572heating degree-days (base 18°C)
278cooling degree-days (base 18°C)
72 melevation

Monthly mean temperature

J: -6 °CJF: -4 °CFM: 2 °CMA: 8 °CAM: 15 °CMJ: 20 °CJJ: 22 °CJA: 21 °CAS: 16 °CSO: 10 °CON: 4 °CND: -2 °CD22 °C

Heating degree-days here run 45% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 77/100 — this site sits in the top third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
31/100environmental-severity index
27.9°Cseasonal temperature swing
242 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #614 largest hydro power plant of 1449 in United States of America by capacity.

United States of America has 1449 hydro power plants in this dataset, together about 102,513 MW of capacity.

Nearby power plants

Location

Coordinates 42.8075, -73.8427 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Vischer Ferry?

Vischer Ferry is a 12 MW source-record hydro power plant in New York, United States of America, commissioned in 1958.

How much electricity does Vischer Ferry generate?

Vischer Ferry generates about 66 GWh of electricity per year.

How many homes can Vischer Ferry power?

Its output is enough to supply roughly 18,742 homes.

Who operates Vischer Ferry?

Vischer Ferry is operated by New York Power Authority.

Built from open public data; no personal information. Operate this site? Request a correction or removal.