Coal power plant in , Philippines. Approximate location 10.349721, 123.60356.
CoalPhilippinessubcritical
Therma Visayas Energy Project is a 509 MW coal power station in , Philippines. It is operated by Therma Visayas Inc [100%]. Based on its capacity (estimated), it can supply roughly 637k homes (estimated). It ranks #39 of 186 Philippines power plants by installed capacity. Commissioned in 2019, it is around 7 years old — recently built. In context, coal supplies about 58.7% of Philippines's electricity; the national grid averages 588 gCO₂/kWh (23.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_thermavisayas_phili.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 340 MW for Therma Visayas Energy Project, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GCPT; fuel: GEM GCPT
At 509 MW, Therma Visayas Energy Project is well above the median coal plant in Philippines (300 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Therma Visayas Inc [100%].
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a tropical monsoon climate (Köppen Am) — Northern Hemisphere, latitude 10.3°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #13 largest coal power plant of 50 in Philippines by capacity.
Philippines has 50 coal power plants in this dataset, together about 18,322 MW of capacity.
Coordinates 10.349721, 123.60356 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Therma Visayas Energy Project is a 509 MW coal power plant in , Philippines, commissioned in 2019.
Its output is enough to supply roughly 636,977 homes (estimated).
Therma Visayas Energy Project is operated by Therma Visayas Inc [100%].
