Coal power plant in Central Visayas, Philippines. Approximate location 10.2185, 123.7577.
CoalCentral VisayasPhilippines
CEBU TPP(Salcon) is a 107 MW coal power station in Central Visayas, Philippines. Based on its capacity (estimated), it can supply roughly 134k homes (estimated). It ranks #95 of 186 Philippines power plants by installed capacity. In context, coal supplies about 58.7% of Philippines's electricity; the national grid averages 588 gCO₂/kWh (23.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1001921.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 107 MW, CEBU TPP(Salcon) is below the median coal plant in Philippines (300 MW). Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a tropical monsoon climate (Köppen Am) — Northern Hemisphere, latitude 10.2°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #38 largest coal power plant of 50 in Philippines by capacity.
Philippines has 50 coal power plants in this dataset, together about 18,322 MW of capacity.
Coordinates 10.2185, 123.7577 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
CEBU TPP(Salcon) is a 107 MW source-record coal power plant in Central Visayas, Philippines.
Its output is enough to supply roughly 133,652 homes (estimated).
