Gas power plant in Alabama, United States of America. Approximate location 32.6514, -86.7386.
GasAlabamaUnited States of AmericaCCGT · HRSGCO₂ measured
Tenaska Lindsay Hill Generating Station is a 939 MW gas power station in Alabama, United States of America. It is operated by Tenaska Alabama Partners LP. Based on reported annual generation of 1,724 GWh, it can supply roughly 493k homes. It ranks #697 of 10,938 United States of America power plants by installed capacity. Commissioned in 2002, it is around 24 years old — relatively modern. Its annual emissions of 1,069,085 t CO₂/yr (US EPA GHGRP) are equivalent to about 249k cars driven for a year. In context, gas supplies about 40.0% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0055271.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000401621); fuel: WRI source-record fuel
At 939 MW, Tenaska Lindsay Hill Generating Station is well above the median gas plant in United States of America (121 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; emissions per US EPA GHGRP (measured for US EPA/EU ETS, modelled for Climate TRACE).
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Tenaska Alabama Partners LP.
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 32.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 51% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 29/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
A gas turbine here also runs ~2% below its ISO (15°C) rating at this annual mean (typical CCGT curve, estimate).
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #240 largest gas power plant of 2165 in United States of America by capacity.
United States of America has 2165 gas power plants in this dataset, together about 789,950 MW of capacity.
Coordinates 32.6514, -86.7386 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Tenaska Lindsay Hill Generating Station is a 939 MW source-record gas power plant in Alabama, United States of America, commissioned in 2002.
Tenaska Lindsay Hill Generating Station generates about 1,724 GWh of electricity per year.
Its output is enough to supply roughly 492,571 homes.
Tenaska Lindsay Hill Generating Station is operated by Tenaska Alabama Partners LP.
Tenaska Lindsay Hill Generating Station has measured emissions of about 1,069,085 tonnes of CO₂ per year (US EPA GHGRP).
