Wind power plant in Piura, Peru. Approximate location -4.5655, -81.2028.
WindPiuraPeruOnshore
Talara is a 30 MW wind power plant in Piura, Peru. It is operated by Energía Eólica S.A.. Based on reported annual generation of 145 GWh, it can supply roughly 41k homes. It ranks #33 of 40 Peru power plants by installed capacity. Commissioned in 2014, it is around 12 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 3.5% of Peru's electricity; the national grid averages 238 gCO₂/kWh (63.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1022109.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000905102); fuel: WRI source-record fuel
Technically it is described as Onshore. Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Energía Eólica S.A..
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a hot desert climate (Köppen BWh) — Southern Hemisphere, latitude 4.6°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #2 largest wind power plant of 2 in Peru by capacity.
Peru has 2 wind power plants in this dataset, together about 62 MW of capacity.
Coordinates -4.5655, -81.2028 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Talara is a 30 MW source-record wind power plant in Piura, Peru, commissioned in 2014.
Talara generates about 145 GWh of electricity per year.
Its output is enough to supply roughly 41,428 homes.
Talara is operated by Energía Eólica S.A..
