Saint-Martin-de-Crau is a 7 MW wind power plant in Provence-Alpes-Cote d'Azur, France. Based on its capacity (estimated), it can supply roughly 6.1k homes (estimated). It ranks #1139 of 2,216 France power plants by installed capacity. Commissioned in 2007, it is around 19 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 8.2% of France's electricity; the national grid averages 41 gCO₂/kWh (94.9% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1024764.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: ODRE official registry; fuel: WRI source-record fuel
At 7 MW, Saint-Martin-de-Crau is below the median wind plant in France (12 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a hot-summer Mediterranean climate (Köppen Csa) — Northern Hemisphere, latitude 43.6°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 33% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 37/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #597 largest wind power plant of 721 in France by capacity.
France has 721 wind power plants in this dataset, together about 9,164 MW of capacity.
Coordinates 43.6121, 4.8564 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Saint-Martin-de-Crau is a 7 MW source-record wind power plant in Provence-Alpes-Cote d'Azur, France, commissioned in 2007.
Its output is enough to supply roughly 6,126 homes (estimated).
