Home / Oceania / Australia / Rowallan

Rowallan — Australia

Hydro power plant in Tasmania, Australia. Approximate location -41.7295, 146.2176.

HydroTasmaniaAustralia

Rowallan is a 10.5 MW hydro power plant in Tasmania, Australia. It is operated by Hydro-Electric Corporation (Tasmania). Based on reported annual generation of 39 GWh, it can supply roughly 11k homes. It ranks #393 of 536 Australia power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 4.3% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).

10.5MW installed capacity
39GWh reported / yr
11,228homes powered

Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000129.

Data status

Known data

FacilityRowallan WRI
CountryAustralia · Tasmania WRI
Coordinates-41.7295, 146.2176 WRI
FuelHydro WRI
MW installed capacity10.5 MW Wikidata P2109; installed/nameplate capacity
Verification noteQuality label backfilled from existing source-backed capacity provenance on 2026-07-05; capacity value was not changed. source-verified
OwnerHydro-Electric Corporation (Tasmania) WRI
GWh reported / yr39 GWh·a⁻¹ WRI

Calculated from dataset

Capacity rank in country#393 / 536 calculated
Fuel-specific rank in country#55 / 73 calculated
Capacity vs country/fuel peers0.23× · 45 MW · n=73 calculated
Homes-powered equivalent11,228 calculated from reported generation
Climate7.2°C · HDD 3,960 derived from coordinates
Environmental severityC4 · 29/100 derived from coordinates

Not available

CommissionedNot available not in dataset
TechnologyNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Source of the capacity and fuel values:

capacity: Wikidata P2109; fuel: WRI GPPD

In context: how this plant compares

At 10.5 MW, Rowallan is below the median hydro plant in Australia (45 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Load factor
43%, from 39 GWh of reported generation; the median for 50 hydro plants in Australia that report generation is 35%
Generation trend
39 GWh in 2013 and 39 GWh in 2018 (+1%)
Highest and lowest year
2017: 50 GWh; 2015: 24 GWh
Share of Australia hydro capacity
0.1% of 8,878 MW across 73 plants in this dataset

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 39 GWh20132014: 48 GWh20142015: 24 GWh20152016: 29 GWh20162017: 50 GWh20172018: 39 GWh201850 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 41.7°S — which shapes how much energy it can produce and how its output varies through the year.

7.2°Cannual mean temp
3,960heating degree-days (base 18°C)
0cooling degree-days (base 18°C)
901 melevation

Monthly mean temperature

J: 12 °CJF: 12 °CFM: 10 °CMA: 8 °CAM: 5 °CMJ: 3 °CJJ: 3 °CJA: 3 °CAS: 5 °CSO: 6 °CON: 8 °CND: 10 °CD12 °C

Heating degree-days here run 61% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 84/100 — this site sits in the top third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.

C4ISO 9223 corrosivity (indicative)
29/100environmental-severity index
9.4°Cseasonal temperature swing
27 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #55 largest hydro power plant of 73 in Australia by capacity.

Australia has 73 hydro power plants in this dataset, together about 8,878 MW of capacity.

Nearby power plants

Location

Coordinates -41.7295, 146.2176 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Rowallan?

Rowallan is a 10.5 MW hydro power plant in Tasmania, Australia.

How much electricity does Rowallan generate?

Rowallan generates about 39 GWh of electricity per year.

Who operates Rowallan?

Rowallan is operated by Hydro-Electric Corporation (Tasmania).

Built from open public data; no personal information. Operate this site? Request a correction or removal.