Fisher is a 46 MW hydro power plant in Tasmania, Australia. It is operated by Hydro-Electric Corporation (Tasmania). Based on reported annual generation of 236 GWh, it can supply roughly 67k homes. It ranks #271 of 536 Australia power plants by installed capacity. Commissioned in 1973, it is around 53 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 4.3% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000135.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100001054535); fuel: WRI source-record fuel
At 46 MW, Fisher is around the median hydro plant in Australia (45 MW). Technically it is described as run-of-river. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Hydro-Electric Corporation (Tasmania). All plants by this company →
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 41.7°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 81% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 90/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #36 largest hydro power plant of 73 in Australia by capacity.
Australia has 73 hydro power plants in this dataset, together about 8,878 MW of capacity.
Coordinates -41.6732, 146.2687 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Fisher is a 46 MW source-record hydro power plant in Tasmania, Australia, commissioned in 1973.
Fisher generates about 236 GWh of electricity per year.
Its output is enough to supply roughly 67,314 homes.
Fisher is operated by Hydro-Electric Corporation (Tasmania).
