Home / South America / Peru / Quillabamba power station

Quillabamba power station

Gas power plant in Cuzco, Peru. Approximate location -12.851689, -72.69782.

GasCuzcoPeruOCGTAnnounced

Quillabamba power station is a 200 MW gas power station in Cuzco, Peru. Based on its capacity (estimated), it can supply roughly 225k homes (estimated). It ranks #15 of 40 Peru power plants by installed capacity. In context, gas supplies about 36.1% of Peru's electricity; the national grid averages 238 gCO₂/kWh (63.6% low-carbon) (2025).

200MW installed capacity
225,257homes powered (est.)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_quillabamba_peru.

Data status

Known data

FacilityQuillabamba power station GEM-GOGPT
CountryPeru · Cuzco GEM-GOGPT
Coordinates-12.851689, -72.69782 GEM-GOGPT
FuelGas GEM-GOGPT
MW installed capacity200 MW GEM GOGPT; source record
TechnologyOCGT GEM-GOGPT

Calculated from dataset

CO₂ emissions315,360 t CO₂·a⁻¹ calculated
Capacity rank in country#15 / 40 calculated
Fuel-specific rank in country#10 / 16 calculated
Capacity vs country/fuel peers0.55× · 360.8 MW · n=16 calculated
Homes-powered equivalent225,257 calculated
Environmental severityC2 · 22/100 derived from coordinates

Not available

OwnerNot available not in dataset
CommissionedNot available not in dataset
GWh reported / yrNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.

capacity: GEM GOGPT; fuel: GEM GOGPT

In context: how this plant compares

At 200 MW, Quillabamba power station is below the median gas plant in Peru (360.8 MW). Technically it is described as OCGT. Its current lifecycle status is “Announced” — so it is not yet, or no longer, generating at full output. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Capacity vs largest gas plants in Peru

Chilca 1: 975 MW975Chilca 1Kallpa: 874 MW874KallpaPuerto Bravo power station: 616 MW616Puerto Bra…Fenix: 587 MW587FenixReserva Fria Ilo: 569 MW569Reserva Fr…Ventanilla: 532 MW532VentanillaSanta Rosa: 447 MW447Santa RosaMalacas power station: 361 MW361Malacas po…

Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).

Climate zone & how it works

This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 12.9°S — which shapes how much energy it can produce and how its output varies through the year.

~11°Ctypical annual mean
~18°Ctypical warm-season mean
Temperate oceanic: warm all year, with distinct wet and dry seasons

Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
22/100environmental-severity index
3.0°Cseasonal temperature swing
339 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #10 largest gas power plant of 16 in Peru by capacity.

Peru has 16 gas power plants in this dataset, together about 6,118 MW of capacity.

Nearby power plants

Location

Coordinates -12.851689, -72.69782 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Quillabamba power station?

Quillabamba power station is a 200 MW gas power plant in Cuzco, Peru.

How many homes can Quillabamba power station power?

Its output is enough to supply roughly 225,257 homes (estimated).

Built from open public data; no personal information. Operate this site? Request a correction or removal.