Wind power plant in Oaxaca, Mexico. Approximate location 16.6123, -94.8105.
WindOaxacaMexico
Oaxaca IV is a 102 MW wind power station in Oaxaca, Mexico. It is operated by CFE/PIE. Based on its capacity (estimated), it can supply roughly 87k homes (estimated). It ranks #189 of 366 Mexico power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 6.0% of Mexico's electricity; the national grid averages 474 gCO₂/kWh (25.9% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id MEX0001878.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 102 MW, Oaxaca IV is well above the median wind plant in Mexico (84 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by CFE/PIE. All plants by this company →
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a tropical savanna climate (Köppen Aw) — Northern Hemisphere, latitude 16.6°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #8 largest wind power plant of 20 in Mexico by capacity.
Mexico has 20 wind power plants in this dataset, together about 1,587 MW of capacity.
Coordinates 16.6123, -94.8105 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Oaxaca IV is a 102 MW source-record wind power plant in Oaxaca, Mexico.
Its output is enough to supply roughly 86,799 homes (estimated).
Oaxaca IV is operated by CFE/PIE.
