Oil power plant in Chittagong, Bangladesh. Approximate location 22.3602, 91.7812.
OilChittagongBangladesh
Noapara (khanjahan ali) is a 40 MW oil power plant in Chittagong, Bangladesh. It is operated by Khanjahan Ali Power Company. Based on its capacity (estimated), it can supply roughly 30k homes (estimated). It ranks #118 of 129 Bangladesh power plants by installed capacity. Commissioned in 2011, it is around 15 years old — relatively modern. In context, oil supplies about 12.1% of Bangladesh's electricity; the national grid averages 696 gCO₂/kWh (2.1% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1029238.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 40 MW, Noapara (khanjahan ali) is below the median oil plant in Bangladesh (100 MW). Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Khanjahan Ali Power Company.
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a tropical monsoon climate (Köppen Am) — Northern Hemisphere, latitude 22.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #43 largest oil power plant of 46 in Bangladesh by capacity.
Bangladesh has 46 oil power plants in this dataset, together about 5,065 MW of capacity.
Coordinates 22.3602, 91.7812 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Noapara (khanjahan ali) is a 40 MW source-record oil power plant in Chittagong, Bangladesh, commissioned in 2011.
Its output is enough to supply roughly 30,034 homes (estimated).
Noapara (khanjahan ali) is operated by Khanjahan Ali Power Company.
