Nihonkaisui TTS Kanda power station is a 50 MW biomass power plant in Fukuoka, Japan. It is operated by Nihon Kaisui Co Ltd. Based on its capacity (estimated), it can supply roughly 69k homes (estimated). It ranks #311 of 692 Japan power plants by installed capacity. In context, biomass supplies about 5.3% of Japan's electricity; the national grid averages 477 gCO₂/kWh (32.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id CT-5323.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: Climate TRACE source-record capacity (modelled/legacy); fuel: Climate TRACE source-record fuel
At 50 MW, Nihonkaisui TTS Kanda power station is around the median biomass plant in Japan (50 MW). Biomass plants burn organic material such as wood, residues or waste-derived fuel to raise steam; they are dispatchable and counted as low-carbon where the feedstock is sustainably sourced.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Nihon Kaisui Co Ltd.
This biomass plant burns organic material (wood, residues) to raise steam for a turbine. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 33.8°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 32% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 37/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #17 largest biomass power plant of 52 in Japan by capacity.
Japan has 52 biomass power plants in this dataset, together about 2,518 MW of capacity.
Coordinates 33.8092, 131.0069 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Nihonkaisui TTS Kanda power station is a 50 MW source-record biomass power plant in Fukuoka, Japan.
Its output is enough to supply roughly 68,828 homes (estimated).
Nihonkaisui TTS Kanda power station is operated by Nihon Kaisui Co Ltd.
