Naantali kt is a 40 MW other power plant in Varsinais-Suomi, Finland. It is operated by Fingrid Oyj. Based on reported annual generation of 606 GWh, it can supply roughly 173k homes. It ranks #80 of 203 Finland power plants by installed capacity. In context, the national grid averages 57 gCO₂/kWh (96.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1002465.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
This facility converts its energy source into electricity for the grid; its capacity, fuel type and location determine its role in the national power mix.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Fingrid Oyj.
This other plant generates electricity for the grid. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 60.5°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 86% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 91/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #4 largest other power plant of 4 in Finland by capacity.
Finland has 4 other power plants in this dataset, together about 282 MW of capacity.
Coordinates 60.459, 22.0545 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Naantali kt is a 40 MW source-record other power plant in Varsinais-Suomi, Finland.
Naantali kt generates about 606 GWh of electricity per year.
Its output is enough to supply roughly 173,114 homes.
Naantali kt is operated by Fingrid Oyj.
