Gas power plant in North Carolina, United States of America. Approximate location 34.9858, -80.506.
GasNorth CarolinaUnited States of AmericaCO₂ modelled
Monroe Generating Station is a 30 MW gas power plant in North Carolina, United States of America. It is operated by North Carolina Mun Power Agny #1. Based on reported annual generation of 1 GWh, it can supply roughly 342 homes. It ranks #4307 of 10,938 United States of America power plants by installed capacity. Commissioned in 2010, it is around 16 years old — relatively modern. Its modelled annual emissions are 43,592 t CO₂/yr (Climate TRACE), equivalent to about 10k cars driven for a year. In context, gas supplies about 40.0% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0057505.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel
At 30 MW, Monroe Generating Station is below the median gas plant in United States of America (121 MW). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; modelled emissions from Climate TRACE.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by North Carolina Mun Power Agny #1. All plants by this company →
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 35.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 34% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 36/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
A gas turbine here also runs ~1% below its ISO (15°C) rating at this annual mean (typical CCGT curve, estimate).
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #1536 largest gas power plant of 2165 in United States of America by capacity.
United States of America has 2165 gas power plants in this dataset, together about 789,950 MW of capacity.
Coordinates 34.9858, -80.506 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Monroe Generating Station is a 30 MW source-record gas power plant in North Carolina, United States of America, commissioned in 2010.
Monroe Generating Station generates about 1 GWh of electricity per year.
Its output is enough to supply roughly 342 homes.
Monroe Generating Station is operated by North Carolina Mun Power Agny #1.
Monroe Generating Station has modelled emissions of about 43,592 tonnes of CO₂ per year (Climate TRACE).
