Wind power plant in New Mexico, United States of America. Approximate location 33.9056, -103.3602.
WindNew MexicoUnited States of America
Milo Wind Project LLC is a 50 MW wind power plant in New Mexico, United States of America. It is operated by EDF Renewable Asset Holdings Inc.. Based on reported annual generation of 221 GWh, it can supply roughly 63k homes. It ranks #3719 of 10,938 United States of America power plants by installed capacity. Commissioned in 2016, it is around 10 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 10.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0059838.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000906672); fuel: WRI source-record fuel
At 50 MW, Milo Wind Project LLC is below the median wind plant in United States of America (68 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by EDF Renewable Asset Holdings Inc.. All plants by this company →
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a cold semi-arid steppe climate (Köppen BSk) — Northern Hemisphere, latitude 33.9°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #636 largest wind power plant of 1139 in United States of America by capacity.
United States of America has 1139 wind power plants in this dataset, together about 104,873 MW of capacity.
Coordinates 33.9056, -103.3602 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Milo Wind Project LLC is a 50 MW source-record wind power plant in New Mexico, United States of America, commissioned in 2016.
Milo Wind Project LLC generates about 221 GWh of electricity per year.
Its output is enough to supply roughly 63,085 homes.
Milo Wind Project LLC is operated by EDF Renewable Asset Holdings Inc..
