Mansurya power station is a 1,840 MW gas power station in Diyala, Iraq. It is operated by Ministry of Electricity (Iraq) [100%]. Based on its capacity (estimated), it can supply roughly 2.1 million homes (estimated). It ranks #13 of 91 Iraq power plants by installed capacity. Commissioned in 2014, it is around 12 years old — relatively modern. In context, gas supplies about 53.0% of Iraq's electricity; the national grid averages 683 gCO₂/kWh (1.6% low-carbon) (2024).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_mansurya_iraq.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 728 MW for Mansurya power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GOGPT; fuel: GEM GOGPT
At 1,840 MW, Mansurya power station is well above the median gas plant in Iraq (740 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG); GE Vernova. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Ministry of Electricity (Iraq) [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a hot semi-arid steppe climate (Köppen BSh) — Northern Hemisphere, latitude 34.1°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #9 largest gas power plant of 55 in Iraq by capacity.
Iraq has 55 gas power plants in this dataset, together about 61,570 MW of capacity.
Coordinates 34.144823, 44.941243 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Mansurya power station is a 1,840 MW gas power plant in Diyala, Iraq, commissioned in 2014.
Its output is enough to supply roughly 2,072,365 homes (estimated).
Mansurya power station is operated by Ministry of Electricity (Iraq) [100%].
