Latakia power station is a 1,052 MW gas power station in Latakia, Syria. It is operated by Public Establishment of Electricity Generation [100%]. Based on its capacity (estimated), it can supply roughly 1.2 million homes (estimated). It ranks #9 of 21 Syria power plants by installed capacity. Commissioned in 2024, it is around 2 years old — recently built.
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_latakia_syria.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 366 MW for Latakia power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GOGPT; fuel: GEM GOGPT
At 1,052 MW, Latakia power station is well above the median gas plant in Syria (910 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Public Establishment of Electricity Generation [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a hot-summer Mediterranean climate (Köppen Csa) — Northern Hemisphere, latitude 35.5°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #8 largest gas power plant of 19 in Syria by capacity.
Syria has 19 gas power plants in this dataset, together about 18,792 MW of capacity.
Coordinates 35.532672, 35.799198 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Latakia power station is a 1,052 MW gas power plant in Latakia, Syria, commissioned in 2024.
Its output is enough to supply roughly 1,184,852 homes (estimated).
Latakia power station is operated by Public Establishment of Electricity Generation [100%].
