Kent Falls — United States of America

Hydro power plant in New York, United States of America. Approximate location 44.7053, -73.5967.

HydroNew YorkUnited States of America

Kent Falls is a 12.4 MW hydro power plant in New York, United States of America. It is operated by New York State Elec & Gas Corp. Based on reported annual generation of 18 GWh, it can supply roughly 5.1k homes. It ranks #5344 of 10,884 United States of America power plants by installed capacity. Commissioned in 1955, it is around 71 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 5.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).

12.4MW installed capacity
18GWh reported / yr
5,114homes powered
1955commissioned (~71 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0002532.

Data status

Known data

FacilityKent Falls WRI
CountryUnited States of America · New York WRI
Coordinates44.7053, -73.5967 WRI
FuelHydro WRI
MW installed capacity12.4 MW Wikidata P2109; installed/nameplate capacity
Verification noteQuality label backfilled from existing source-backed capacity provenance on 2026-07-05; capacity value was not changed. source-verified
OwnerNew York State Elec & Gas Corp WRI
Commissioned1955 WRI
GWh reported / yr18 GWh·a⁻¹ WRI

Calculated from dataset

Capacity rank in country#5344 / 10884 calculated
Fuel-specific rank in country#586 / 1449 calculated
Capacity vs country/fuel peers1.55× · 8 MW · n=1449 calculated
Homes-powered equivalent5,114 calculated from reported generation
Climate6.5°C · HDD 4,290 derived from coordinates
Environmental severityC2 · 31/100 derived from coordinates

Not available

TechnologyNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Source of the capacity and fuel values:

capacity: Wikidata P2109; fuel: WRI GPPD

In context: how this plant compares

At 12.4 MW, Kent Falls is well above the median hydro plant in United States of America (8 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Load factor
16%, from 18 GWh of reported generation; the median for 1342 hydro plants in United States of America that report generation is 42%
Generation trend
64 GWh in 2013 and 18 GWh in 2019 (−72%)
Highest and lowest year
2013: 64 GWh; 2017: 13 GWh
Share of United States of America hydro capacity
less than 0.1% of 102,513 MW across 1,449 plants in this dataset
Age among peers
645 of 1,444 dated hydro plants in United States of America are older

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 64 GWh20132014: 55 GWh20142015: 39 GWh20152016: 40 GWh20162017: 13 GWh20172018: 58 GWh20182019: 18 GWh201964 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by New York State Elec & Gas Corp.

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 44.7°N — which shapes how much energy it can produce and how its output varies through the year.

6.5°Cannual mean temp
4,290heating degree-days (base 18°C)
110cooling degree-days (base 18°C)
213 melevation

Monthly mean temperature

J: -9 °CJF: -7 °CFM: -2 °CMA: 6 °CAM: 13 °CMJ: 18 °CJJ: 20 °CJA: 19 °CAS: 14 °CSO: 8 °CON: 2 °CND: -5 °CD20 °C

Heating degree-days here run 75% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 88/100 — this site sits in the top third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
31/100environmental-severity index
29.0°Cseasonal temperature swing
293 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #586 largest hydro power plant of 1449 in United States of America by capacity.

United States of America has 1449 hydro power plants in this dataset, together about 102,513 MW of capacity.

Nearby power plants

Location

Coordinates 44.7053, -73.5967 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Kent Falls?

Kent Falls is a 12.4 MW hydro power plant in New York, United States of America, commissioned in 1955.

How much electricity does Kent Falls generate?

Kent Falls generates about 18 GWh of electricity per year.

Who operates Kent Falls?

Kent Falls is operated by New York State Elec & Gas Corp.

Built from open public data; no personal information. Operate this site? Request a correction or removal.