Kayseri Metalworks power station is a 30 MW oil power plant in Central Anatolia, Turkey. It is operated by Ipek Mobilya Imalat Ithalat Ihracat Sanayi Ve Ticaret Cinkom Subesi AŞ [100%]. Based on its capacity (estimated), it can supply roughly 23k homes (estimated). It ranks #390 of 502 Turkey power plants by installed capacity. In context, oil supplies about 0.3% of Turkey's electricity; the national grid averages 475 gCO₂/kWh (43.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_kayserimetalworks_trkiye.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000408840; fuel: GEM GOGPT
At 30 MW, Kayseri Metalworks power station is below the median oil plant in Turkey (162.6 MW). Technically it is described as Engine. Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Ipek Mobilya Imalat Ithalat Ihracat Sanayi Ve Ticaret Cinkom Subesi AŞ [100%].
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a warm-summer Mediterranean climate (Köppen Csb) — Northern Hemisphere, latitude 38.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 91% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 92/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #11 largest oil power plant of 11 in Turkey by capacity.
Turkey has 11 oil power plants in this dataset, together about 2,740 MW of capacity.
Coordinates 38.7107, 35.3328 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Kayseri Metalworks power station is a 30 MW oil power plant in Central Anatolia, Turkey.
Its output is enough to supply roughly 22,525 homes (estimated).
Kayseri Metalworks power station is operated by Ipek Mobilya Imalat Ithalat Ihracat Sanayi Ve Ticaret Cinkom Subesi AŞ [100%].
