Kanbauk (UPA) power station is a 200 MW gas power station in Tanintharyi, Myanmar. It is operated by Myanmar UPA Co Ltd [100%]. Based on its capacity (estimated), it can supply roughly 225k homes (estimated). It ranks #33 of 69 Myanmar power plants by installed capacity. In context, gas supplies about 46.1% of Myanmar's electricity; the national grid averages 503 gCO₂/kWh (47.9% low-carbon) (2024).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_kanbaukupa_myanma.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GOGPT; fuel: GEM GOGPT
At 200 MW, Kanbauk (UPA) power station is well above the median gas plant in Myanmar (172.2 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Its current lifecycle status is “Pre Construction” — so it is not yet, or no longer, generating at full output. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Myanmar UPA Co Ltd [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a tropical monsoon climate (Köppen Am) — Northern Hemisphere, latitude 14.6°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #13 largest gas power plant of 27 in Myanmar by capacity.
Myanmar has 27 gas power plants in this dataset, together about 12,801 MW of capacity.
Coordinates 14.59421, 98.031202 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Kanbauk (UPA) power station is a 200 MW gas power plant in Tanintharyi, Myanmar, Pre Construction 2030.
Its output is enough to supply roughly 225,257 homes (estimated).
Kanbauk (UPA) power station is operated by Myanmar UPA Co Ltd [100%].
