Hydro power plant in Sao Paulo, Brazil. Approximate location -23.8753, -46.4486.
HydroSao PauloBrazilrun-of-river
Henry Borden is a 889 MW hydro power station in Sao Paulo, Brazil. It is operated by Empresa Metropolitana de Águas e Energia SA [100%]. Based on its capacity (estimated), it can supply roughly 890k homes (estimated). It ranks #62 of 2,572 Brazil power plants by installed capacity. Commissioned in 1926, it is around 100 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 51.8% of Brazil's electricity; the national grid averages 110 gCO₂/kWh (88.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id BRA0001084.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000600266); fuel: WRI source-record fuel
At 889 MW, Henry Borden is well above the median hydro plant in Brazil (12 MW). Technically it is described as run-of-river. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Empresa Metropolitana de Águas e Energia SA [100%].
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a humid subtropical climate (Köppen Cfa) — Southern Hemisphere, latitude 23.9°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #31 largest hydro power plant of 701 in Brazil by capacity.
Brazil has 701 hydro power plants in this dataset, together about 105,987 MW of capacity.
Coordinates -23.8753, -46.4486 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Henry Borden is a 889 MW source-record hydro power plant in Sao Paulo, Brazil, commissioned in 1926.
Its output is enough to supply roughly 890,016 homes (estimated).
Henry Borden is operated by Empresa Metropolitana de Águas e Energia SA [100%].
