Cogeneration power plant in England, United Kingdom. Approximate location 54.4184, -3.4883.
CogenerationEnglandUnited KingdomCCGT · HRSG
Fellside CHP is a 155 MW cogeneration power station in England, United Kingdom. It is operated by Px Limited. Based on its capacity (estimated), it can supply roughly 194k homes (estimated). It ranks #142 of 2,860 United Kingdom power plants by installed capacity. Commissioned in 1995, it is around 31 years old — long-established. In context, the national grid averages 217 gCO₂/kWh (64.4% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GBR1000317.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000400747); fuel: WRI source-record fuel
At 155 MW, Fellside CHP is well above the median cogeneration plant in United Kingdom (65 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). This facility converts its energy source into electricity for the grid; its capacity, fuel type and location determine its role in the national power mix.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Px Limited.
This cogeneration plant produces electricity and useful heat together for higher fuel efficiency. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 54.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 45% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 77/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #3 largest cogeneration power plant of 7 in United Kingdom by capacity.
United Kingdom has 7 cogeneration power plants in this dataset, together about 3,082 MW of capacity.
Coordinates 54.4184, -3.4883 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Fellside CHP is a 155 MW source-record cogeneration power plant in England, United Kingdom, commissioned in 1995.
Its output is enough to supply roughly 193,971 homes (estimated).
Fellside CHP is operated by Px Limited.
