Biomass power plant in Oregon, United States of America. Approximate location 45.4005, -122.7658.
BiomassOregonUnited States of America
Durham AWTF is a 2 MW biomass power plant in Oregon, United States of America. It is operated by Clean Water Services. Based on reported annual generation of 13 GWh, it can supply roughly 3.7k homes. It ranks #9609 of 10,938 United States of America power plants by installed capacity. Commissioned in 2015, it is around 11 years old — relatively modern. In context, biomass supplies about 1.0% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0060263.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel
At 2 MW, Durham AWTF is below the median biomass plant in United States of America (18 MW). Biomass plants burn organic material such as wood, residues or waste-derived fuel to raise steam; they are dispatchable and counted as low-carbon where the feedstock is sustainably sourced.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Clean Water Services.
This biomass plant burns organic material (wood, residues) to raise steam for a turbine. It sits in a warm-summer Mediterranean climate (Köppen Csb) — Northern Hemisphere, latitude 45.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 2% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 49/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #156 largest biomass power plant of 184 in United States of America by capacity.
United States of America has 184 biomass power plants in this dataset, together about 6,324 MW of capacity.
Coordinates 45.4005, -122.7658 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Durham AWTF is a 2 MW source-record biomass power plant in Oregon, United States of America, commissioned in 2015.
Durham AWTF generates about 13 GWh of electricity per year.
Its output is enough to supply roughly 3,714 homes.
Durham AWTF is operated by Clean Water Services.
