Home / Asia / Lebanon / Deir Ammar

Deir Ammar

Gas power plant in Liban-Nord, Lebanon. Approximate location 34.465, 35.8942.

GasLiban-NordLebanonCCGT · HRSGAnsaldo Energia: not found, Siemens Energy: not found, Ansal

Deir Ammar is a 465 MW gas power station in Liban-Nord, Lebanon. It is operated by Electricity Of Lebanon [100%]. Based on its capacity (estimated), it can supply roughly 524k homes (estimated). It ranks #3 of 10 Lebanon power plants by installed capacity. Commissioned in 1998, it is around 28 years old — long-established. In context, gas supplies about 0.0% of Lebanon's electricity; the national grid averages 390 gCO₂/kWh (43.8% low-carbon) (2024).

465MW installed capacity
1HRSG unit(s)
523,722homes powered (est.)
1998commissioned (~28 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1023661.

Data status

Known data

FacilityDeir Ammar WRI
CountryLebanon · Liban-Nord WRI
Coordinates34.465, 35.8942 WRI
FuelGas WRI
MW installed capacity465 MW GEM · 2026 · L100000406962; operating plant capacity
OwnerElectricity Of Lebanon [100%] WRI
Commissioned1998 WRI
TechnologyCCGT · Ansaldo Energia: not found, Siemens Energy: not found, Ansaldo Energia: not found · HRSG WRI

Calculated from dataset

CO₂ emissions733,212 t CO₂·a⁻¹ calculated
Capacity rank in country#3 / 10 calculated
Fuel-specific rank in country#2 / 3 calculated
Homes-powered equivalent523,722 calculated
Climate18.8°C · HDD 755 derived from coordinates
Environmental severityC4 · 44/100 derived from coordinates

Not available

GWh reported / yrNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.

capacity: GEM · 2026 · L100000406962; fuel: WRI GPPD

In context: how this plant compares

Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG); Ansaldo Energia: not found, Siemens Energy: not found, Ansal. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Capacity vs largest gas plants in Lebanon

Salaata IPP power plant: 825 MW825Salaata IP…Deir Ammar: 465 MW465Deir AmmarZahrani: 465 MW465Zahrani

Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Electricity Of Lebanon [100%].

Local climate & thermal context

This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a hot-summer Mediterranean climate (Köppen Csa) — Northern Hemisphere, latitude 34.5°N — which shapes how much energy it can produce and how its output varies through the year.

18.8°Cannual mean temp
755heating degree-days (base 18°C)
1,045cooling degree-days (base 18°C)
327 melevation

Monthly mean temperature

J: 11 °CJF: 12 °CFM: 14 °CMA: 17 °CAM: 21 °CMJ: 24 °CJJ: 26 °CJA: 26 °CAS: 25 °CSO: 22 °CON: 17 °CND: 13 °CD26 °C

Heating degree-days here run 69% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 24/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.

A gas turbine here also runs ~3% below its ISO (15°C) rating at this annual mean (typical CCGT curve, estimate).

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.

C4ISO 9223 corrosivity (indicative)
44/100environmental-severity index
15.1°Cseasonal temperature swing
27 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #2 largest gas power plant of 3 in Lebanon by capacity.

Lebanon has 3 gas power plants in this dataset, together about 1,755 MW of capacity.

Nearby power plants

Location

Coordinates 34.465, 35.8942 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Deir Ammar?

Deir Ammar is a 465 MW gas power plant in Liban-Nord, Lebanon, commissioned in 1998.

How many homes can Deir Ammar power?

Its output is enough to supply roughly 523,722 homes (estimated).

Who operates Deir Ammar?

Deir Ammar is operated by Electricity Of Lebanon [100%].

Built from open public data; no personal information. Operate this site? Request a correction or removal.