Home / North America / United States of America / Columbia Flooring Melbourne

Columbia Flooring Melbourne — United States of America

Waste power plant in Arkansas, United States of America. Approximate location 36.0605, -91.9198.

WasteArkansasUnited States of America

Columbia Flooring Melbourne is a 2 MW waste power plant in Arkansas, United States of America. It is operated by Unilin Flooring NC LLC-Columbia Flooring. Based on its capacity (estimated), it can supply roughly 2.8k homes (estimated). It ranks #8853 of 10,884 United States of America power plants by installed capacity. Commissioned in 1980, it is around 46 years old — long-established. In context, the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).

2MW installed capacity
2,753homes powered (est.)
1980commissioned (~46 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0056182.

Data status

Known data

FacilityColumbia Flooring Melbourne WRI
CountryUnited States of America · Arkansas WRI
Coordinates36.0605, -91.9198 WRI
FuelWaste WRI
MW installed capacity2 MW WRI GPPD; source record
OwnerUnilin Flooring NC LLC-Columbia Flooring WRI
Commissioned1980 WRI

Calculated from dataset

Capacity rank in country#8853 / 10884 calculated
Fuel-specific rank in country#499 / 551 calculated
Capacity vs country/fuel peers0.30× · 6.6 MW · n=551 calculated
Homes-powered equivalent2,753 calculated
Climate14.9°C · HDD 1,929 derived from coordinates
Environmental severityC3 · 36/100 derived from coordinates

Not available

TechnologyNot available not in dataset
GWh reported / yrNot available not in dataset
CO₂ emissionsNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Capacity and fuel are the upstream open-dataset record, not yet matched to a 2026 registry or GEM entry.

capacity: WRI GPPD; fuel: WRI GPPD

In context: how this plant compares

At 2 MW, Columbia Flooring Melbourne is below the median waste plant in United States of America (6.6 MW). Waste-to-energy plants burn municipal solid waste to generate electricity and heat, cutting landfill volume while recovering energy from residual waste.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Generation trend
7 GWh in 2013 and 6 GWh in 2018 (−20%)
Highest and lowest year
2013: 7 GWh; 2016: 2 GWh
Share of United States of America waste capacity
less than 0.1% of 10,154 MW across 551 plants in this dataset
Age among peers
19 of 541 dated waste plants in United States of America are older

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 7 GWh20132014: 7 GWh20142015: 0 GWh20152016: 2 GWh20162017: 5 GWh20172018: 6 GWh20182019: 0 GWh20197 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Unilin Flooring NC LLC-Columbia Flooring.

Local climate & thermal context

This waste plant recovers energy by combusting municipal or industrial waste. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 36.1°N — which shapes how much energy it can produce and how its output varies through the year.

14.9°Cannual mean temp
1,929heating degree-days (base 18°C)
812cooling degree-days (base 18°C)
185 melevation

Monthly mean temperature

J: 2 °CJF: 5 °CFM: 10 °CMA: 15 °CAM: 19 °CMJ: 24 °CJJ: 26 °CJA: 26 °CAS: 22 °CSO: 16 °CON: 10 °CND: 4 °CD26 °C

Heating degree-days here run 22% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 42/100 — this site sits in the mid third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.

C3ISO 9223 corrosivity (indicative)
36/100environmental-severity index
24.0°Cseasonal temperature swing
750 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #499 largest waste power plant of 551 in United States of America by capacity.

United States of America has 551 waste power plants in this dataset, together about 10,154 MW of capacity.

Nearby power plants

Location

Coordinates 36.0605, -91.9198 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Columbia Flooring Melbourne?

Columbia Flooring Melbourne is a 2 MW waste power plant in Arkansas, United States of America, commissioned in 1980.

Who operates Columbia Flooring Melbourne?

Columbia Flooring Melbourne is operated by Unilin Flooring NC LLC-Columbia Flooring.

Built from open public data; no personal information. Operate this site? Request a correction or removal.