Storage power plant in England, United Kingdom. Approximate location 54.5561, -0.8216.
StorageEnglandUnited Kingdom
Cleveland Potash is a 6 MW storage power plant in England, United Kingdom. It is operated by Kiwi Power. Based on its capacity (estimated), it can supply roughly 1.5k homes (estimated). It ranks #1323 of 2,860 United Kingdom power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, the national grid averages 217 gCO₂/kWh (64.4% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GBR2001154.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 6 MW, Cleveland Potash is below the median storage plant in United Kingdom (10 MW). This facility converts its energy source into electricity for the grid; its capacity, fuel type and location determine its role in the national power mix.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Kiwi Power.
This storage plant stores and releases electricity (pumped-hydro or batteries) to balance the grid. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 54.6°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 49% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 79/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #20 largest storage power plant of 31 in United Kingdom by capacity.
United Kingdom has 31 storage power plants in this dataset, together about 897 MW of capacity.
Coordinates 54.5561, -0.8216 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Cleveland Potash is a 6 MW source-record storage power plant in England, United Kingdom.
Its output is enough to supply roughly 1,501 homes (estimated).
Cleveland Potash is operated by Kiwi Power.
