Can Tho is a 185 MW oil power station in Can Tho, Vietnam. It is operated by Vietnam Electricity (EVN). Based on its capacity (estimated), it can supply roughly 139k homes (estimated). It ranks #114 of 298 Vietnam power plants by installed capacity. Commissioned in 2009, it is around 17 years old — relatively modern. In context, oil supplies about 0.2% of Vietnam's electricity; the national grid averages 461 gCO₂/kWh (45.4% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1030733.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 185 MW, Can Tho is around the median oil plant in Vietnam (185 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG); Mitsubishi Heavy Industries: M701JAC. Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Vietnam Electricity (EVN). All plants by this company →
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a tropical savanna climate (Köppen Aw) — Northern Hemisphere, latitude 10.1°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #3 largest oil power plant of 6 in Vietnam by capacity.
Vietnam has 6 oil power plants in this dataset, together about 915 MW of capacity.
Coordinates 10.1, 105.72 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Can Tho is a 185 MW source-record oil power plant in Can Tho, Vietnam, commissioned in 2009.
Its output is enough to supply roughly 138,908 homes (estimated).
Can Tho is operated by Vietnam Electricity (EVN).
