Petcoke power plant in Louisiana, United States of America. Approximate location 31.395, -92.7167.
PetcokeLouisianaUnited States of America
Brame Energy Center is a 1,707 MW petcoke power station in Louisiana, United States of America. It is operated by Cleco Power LLC. Based on reported annual generation of 5,018 GWh, it can supply roughly 1.4 million homes. It ranks #310 of 10,938 United States of America power plants by installed capacity. Commissioned in 1991, it is around 35 years old — long-established. In context, the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0006190.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000103957); fuel: WRI source-record fuel
At 1,707 MW, Brame Energy Center is well above the median petcoke plant in United States of America (68 MW). This facility converts its energy source into electricity for the grid; its capacity, fuel type and location determine its role in the national power mix.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Cleco Power LLC. All plants by this company →
This petcoke plant generates electricity for the grid. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 31.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 63% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 25/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #1 largest petcoke power plant of 11 in United States of America by capacity.
United States of America has 11 petcoke power plants in this dataset, together about 2,366 MW of capacity.
Coordinates 31.395, -92.7167 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Brame Energy Center is a 1,707 MW source-record petcoke power plant in Louisiana, United States of America, commissioned in 1991.
Brame Energy Center generates about 5,018 GWh of electricity per year.
Its output is enough to supply roughly 1,433,657 homes.
Brame Energy Center is operated by Cleco Power LLC.
