Beaver Dam

Gas power plant in Pennsylvania, United States of America. Approximate location 41.6114, -76.8431.

GasPennsylvaniaUnited States of America

Beaver Dam is a 22 MW gas power plant in Pennsylvania, United States of America. It is operated by Beaver Dam Energy LLC. Based on reported annual generation of 53 GWh, it can supply roughly 15k homes. It ranks #4604 of 10,938 United States of America power plants by installed capacity. Commissioned in 2016, it is around 10 years old — relatively modern. In context, gas supplies about 40.0% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).

22Source-backed capacity
53GWh reported / yr
15,200homes powered
2016commissioned (~10 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0058811.

Data status

Known data

FacilityBeaver Dam WRI
CountryUnited States of America · Pennsylvania WRI
Coordinates41.6114, -76.8431 WRI
FuelGas WRI
MW installed capacity22 MW WRI source record; scope not independently normalised
OwnerBeaver Dam Energy LLC WRI
Commissioned2016 WRI
GWh reported / yr53 GWh/yr WRI

Calculated from dataset

CO₂ emissions21,280 t CO₂/yr calculated
Capacity rank in country#4604 of 10938 calculated
Fuel-specific rank in country#1596 of 2165 calculated
Capacity vs country/fuel peers0.18× · 121 MW median · 2165 peers calculated
Homes-powered equivalent15,200 calculated from reported generation
Climate7.4°C · HDD 3,933 derived from coordinates
Environmental severityC2 · 29/100 derived from coordinates

Not available

TechnologyNot available not in dataset
GWh reported / yrNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.

capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel

In context: how this plant compares

At 22 MW, Beaver Dam is below the median gas plant in United States of America (121 MW). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Reported generation trend

2016: 62 GWh20162017: 63 GWh20172018: 65 GWh20182019: 53 GWh201965 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Beaver Dam Energy LLC.

Local climate & thermal context

This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 41.6°N — which shapes how much energy it can produce and how its output varies through the year.

7.4°Cannual mean temp
3,933heating degree-days (base 18°C)
72cooling degree-days (base 18°C)
568 melevation

Monthly mean temperature

J: -6 °CJF: -5 °CFM: 0 °CMA: 6 °CAM: 12 °CMJ: 17 °CJJ: 20 °CJA: 19 °CAS: 15 °CSO: 9 °CON: 3 °CND: -3 °CD20 °C

Heating degree-days here run 60% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 83/100 — this site sits in the top third of the power plants we cover by heating degree-days.

A gas turbine here also runs ~0% below its ISO (15°C) rating at this annual mean (typical CCGT curve, estimate).

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
29/100environmental-severity index
25.2°Cseasonal temperature swing
302 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #1596 largest gas power plant of 2165 in United States of America by capacity.

United States of America has 2165 gas power plants in this dataset, together about 789,950 MW of capacity.

Nearby power plants

Location

Coordinates 41.6114, -76.8431 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Beaver Dam?

Beaver Dam is a 22 MW source-record gas power plant in Pennsylvania, United States of America, commissioned in 2016.

How much electricity does Beaver Dam generate?

Beaver Dam generates about 53 GWh of electricity per year.

How many homes can Beaver Dam power?

Its output is enough to supply roughly 15,200 homes.

Who operates Beaver Dam?

Beaver Dam is operated by Beaver Dam Energy LLC.

Built from open public data; no personal information. Operate this site? Request a correction or removal.