Home / North America / United States of America / B&K Energy Systems LLC

B&K Energy Systems LLC

Wind power plant in Iowa, United States of America. Approximate location 43.6514, -95.3755.

WindIowaUnited States of America

B&K Energy Systems LLC is a 2 MW wind power plant in Iowa, United States of America. It is operated by Brewster. Based on reported annual generation of 1 GWh, it can supply roughly 257 homes. It ranks #8834 of 10,938 United States of America power plants by installed capacity. Commissioned in 2004, it is around 22 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 10.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).

2Source-backed capacity
1GWh reported / yr
257homes powered
2004commissioned (~22 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id USA0056210.

Data status

Known data

FacilityB&K Energy Systems LLC WRI
CountryUnited States of America · Iowa WRI
Coordinates43.6514, -95.3755 WRI
FuelWind WRI
MW installed capacity2 MW WRI source record; scope not independently normalised
OwnerBrewster WRI
Commissioned2004 WRI
GWh reported / yr1 GWh/yr WRI

Calculated from dataset

Capacity rank in country#8834 of 10938 calculated
Fuel-specific rank in country#1007 of 1139 calculated
Capacity vs country/fuel peers0.03× · 68 MW median · 1139 peers calculated
Homes-powered equivalent257 calculated from reported generation
Climate7.0°C · HDD 4,254 derived from coordinates
Environmental severityC2 · 34/100 derived from coordinates

Not available

TechnologyNot available not in dataset
GWh reported / yrNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.

capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel

In context: how this plant compares

At 2 MW, B&K Energy Systems LLC is below the median wind plant in United States of America (68 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Reported generation trend

2013: 6 GWh20132014: 7 GWh20142015: 6 GWh20152016: 6 GWh20162017: 6 GWh20172018: 5 GWh20182019: 1 GWh20197 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Brewster.

Local climate & thermal context

This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 43.7°N — which shapes how much energy it can produce and how its output varies through the year.

7.0°Cannual mean temp
4,254heating degree-days (base 18°C)
275cooling degree-days (base 18°C)
437 melevation

Monthly mean temperature

J: -11 °CJF: -7 °CFM: 0 °CMA: 7 °CAM: 15 °CMJ: 20 °CJJ: 22 °CJA: 21 °CAS: 16 °CSO: 9 °CON: 0 °CND: -8 °CD22 °C

Heating degree-days here run 73% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 87/100 — this site sits in the top third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
34/100environmental-severity index
32.8°Cseasonal temperature swing
600 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #1007 largest wind power plant of 1139 in United States of America by capacity.

United States of America has 1139 wind power plants in this dataset, together about 104,873 MW of capacity.

Nearby power plants

Location

Coordinates 43.6514, -95.3755 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is B&K Energy Systems LLC?

B&K Energy Systems LLC is a 2 MW source-record wind power plant in Iowa, United States of America, commissioned in 2004.

How much electricity does B&K Energy Systems LLC generate?

B&K Energy Systems LLC generates about 1 GWh of electricity per year.

How many homes can B&K Energy Systems LLC power?

Its output is enough to supply roughly 257 homes.

Who operates B&K Energy Systems LLC?

B&K Energy Systems LLC is operated by Brewster.

Built from open public data; no personal information. Operate this site? Request a correction or removal.