Coal power plant in North Carolina, United States of America. Approximate location 35.470592, -82.543506.
CoalNorth CarolinaUnited States of Americasubcritical
Asheville Plant is a 1,012 MW coal power station in North Carolina, United States of America. It is operated by Duke Energy Progress LLC [100%]. Based on its capacity (estimated), it can supply roughly 1.3 million homes (estimated). It ranks #646 of 10,938 United States of America power plants by installed capacity. Commissioned in 1964, it is around 62 years old — an older, legacy facility. In context, coal supplies about 16.3% of United States of America's electricity; the national grid averages 384 gCO₂/kWh (43.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_asheville_unite.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000104071; fuel: GEM GCPT
At 1,012 MW, Asheville Plant is well above the median coal plant in United States of America (558 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Duke Energy Progress LLC [100%].
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 35.5°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 6% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 48/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #245 largest coal power plant of 802 in United States of America by capacity.
United States of America has 802 coal power plants in this dataset, together about 621,194 MW of capacity.
Coordinates 35.470592, -82.543506 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Asheville Plant is a 1,012 MW coal power plant in North Carolina, United States of America, commissioned in 1964.
Its output is enough to supply roughly 1,266,445 homes (estimated).
Asheville Plant is operated by Duke Energy Progress LLC [100%].
