Urumqi Petrochemical power station is a 150 MW coal power station in Xinjiang Uygur Zizhiqu, China. It is operated by PetroChina Co Ltd. Based on its capacity (estimated), it can supply roughly 188k homes (estimated). It ranks #2309 of 6,685 China power plants by installed capacity. Commissioned in 2001, it is around 25 years old — relatively modern. Its modelled annual emissions are 316,300 t CO₂/yr (Climate TRACE), equivalent to about 74k cars driven for a year. In context, coal supplies about 54.3% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1075745.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 100 MW for Urumqi Petrochemical power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
Capacity claim grade: A3_MAJOR_REVIEW_SCOPE_STATUS - recommended action: manual_scope_status_check - confidence: low_until_scope_verified. This follows a claim-based data model: value + scope + source + confidence, rather than silently overwriting records.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 150 MW, Urumqi Petrochemical power station is below the median coal plant in China (700 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; modelled emissions from Climate TRACE.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by PetroChina Co Ltd.
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a cold semi-arid steppe climate (Köppen BSk) — Northern Hemisphere, latitude 44.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 83% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 91/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with thermal cycling the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #1546 largest coal power plant of 1907 in China by capacity.
China has 1907 coal power plants in this dataset, together about 1,882,493 MW of capacity.
Coordinates 43.9702, 87.7219 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Urumqi Petrochemical power station is a 150 MW source-record coal power plant in Xinjiang Uygur Zizhiqu, China, commissioned in 2001.
Its output is enough to supply roughly 187,714 homes (estimated).
Urumqi Petrochemical power station is operated by PetroChina Co Ltd.
Urumqi Petrochemical power station has modelled emissions of about 316,300 tonnes of CO₂ per year (Climate TRACE).
