TURBIGO is a 1,285 MW oil power station in Lombardy, Italy. It is operated by Edipower. Based on reported annual generation of 1,272 GWh, it can supply roughly 363k homes. It ranks #11 of 489 Italy power plants by installed capacity. Commissioned in 2008, it is around 18 years old — relatively modern. Its annual emissions of 954,808 t CO₂/yr (EU ETS verified (EUTL 2023)) are equivalent to about 223k cars driven for a year. In context, oil supplies about 2.6% of Italy's electricity; the national grid averages 285 gCO₂/kWh (48.8% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1002973.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 1,285 MW for Turbigo power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
Capacity claim grade: A2_GENERAL_REVIEW - recommended action: manual_source_check - confidence: medium_low. This follows a claim-based data model: value + scope + source + confidence, rather than silently overwriting records.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000400474); fuel: WRI source-record fuel
At 1,285 MW, TURBIGO is well above the median oil plant in Italy (210 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG); Ansaldo Energia: AE94.3A. Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; emissions per EU ETS verified (EUTL 2023) (measured for US EPA/EU ETS, modelled for Climate TRACE).
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Edipower. All plants by this company →
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 45.5°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 3% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 51/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #2 largest oil power plant of 15 in Italy by capacity.
Italy has 15 oil power plants in this dataset, together about 9,157 MW of capacity.
Coordinates 45.5201, 8.7422 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
TURBIGO is a 1,285 MW source-record oil power plant in Lombardy, Italy, commissioned in 2008.
TURBIGO generates about 1,272 GWh of electricity per year.
Its output is enough to supply roughly 363,314 homes.
TURBIGO is operated by Edipower.
TURBIGO has measured emissions of about 954,808 tonnes of CO₂ per year (EU ETS verified (EUTL 2023)).
