Tuno Knob is a 5 MW wind power plant in Central Jutland, Denmark. It is operated by Dong Energy. Based on its capacity (estimated), it can supply roughly 4.3k homes (estimated). It ranks #55 of 57 Denmark power plants by installed capacity. Commissioned in 1995, it is around 31 years old — long-established. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 57.7% of Denmark's electricity; the national grid averages 114 gCO₂/kWh (91.2% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1030003.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 5 MW, Tuno Knob is below the median wind plant in Denmark (21 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Dong Energy.
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 56.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 41% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 75/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #18 largest wind power plant of 19 in Denmark by capacity.
Denmark has 19 wind power plants in this dataset, together about 1,412 MW of capacity.
Coordinates 55.9694, 10.3556 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Tuno Knob is a 5 MW source-record wind power plant in Central Jutland, Denmark, commissioned in 1995.
Its output is enough to supply roughly 4,254 homes (estimated).
Tuno Knob is operated by Dong Energy.
