Tamala Park is a 5 MW waste power plant in Western Australia, Australia. It is operated by Landfill Gas and Power Pty Ltd. Based on reported annual generation of 42 GWh, it can supply roughly 12k homes. It ranks #440 of 536 Australia power plants by installed capacity. In context, the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000356.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 5 MW, Tamala Park is well above the median waste plant in Australia (3 MW). Waste-to-energy plants burn municipal solid waste to generate electricity and heat, cutting landfill volume while recovering energy from residual waste.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Operated by Landfill Gas and Power Pty Ltd.
This waste plant recovers energy by combusting municipal or industrial waste. It sits in a hot-summer Mediterranean climate (Köppen Csa) — Southern Hemisphere, latitude 31.7°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 78% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 21/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #14 largest waste power plant of 50 in Australia by capacity.
Australia has 50 waste power plants in this dataset, together about 189 MW of capacity.
Coordinates -31.7078, 115.7266 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Tamala Park is a 5 MW source-record waste power plant in Western Australia, Australia.
Tamala Park generates about 42 GWh of electricity per year.
Its output is enough to supply roughly 12,085 homes.
Tamala Park is operated by Landfill Gas and Power Pty Ltd.
