Shannonbridge power station is a 264 MW oil power station in Shannonbridge, Ireland. It is operated by Electricity Supply Board. Based on its capacity (estimated), it can supply roughly 198k homes (estimated). It ranks #16 of 76 Ireland power plants by installed capacity. Commissioned in 2024, it is around 2 years old — recently built. In context, oil supplies about 3.0% of Ireland's electricity; the national grid averages 257 gCO₂/kWh (48.1% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_shannonbridge_irelan.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100001000154; fuel: GEM GOGPT
At 264 MW, Shannonbridge power station is well above the median oil plant in Ireland (112 MW). Technically it is described as OCGT. Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Electricity Supply Board.
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 53.3°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 22% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 62/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #2 largest oil power plant of 7 in Ireland by capacity.
Ireland has 7 oil power plants in this dataset, together about 1,400 MW of capacity.
Coordinates 53.2723, -8.0393 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Shannonbridge power station is a 264 MW oil power plant in Shannonbridge, Ireland, commissioned in 2024.
Its output is enough to supply roughly 198,226 homes (estimated).
Shannonbridge power station is operated by Electricity Supply Board.
