Setubal Mill power station is a 80 MW gas power plant in Aveiro, Portugal. It is operated by The Navigator Co [100%]. Based on its capacity (estimated), it can supply roughly 90k homes (estimated). It ranks #32 of 480 Portugal power plants by installed capacity. Commissioned in 2009, it is around 17 years old — relatively modern. In context, gas supplies about 16.4% of Portugal's electricity; the national grid averages 128 gCO₂/kWh (81.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_setubalmill_portug.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000407835; fuel: GEM GOGPT
At 80 MW, Setubal Mill power station is around the median gas plant in Portugal (80 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by The Navigator Co [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a warm-summer Mediterranean climate (Köppen Csb) — Northern Hemisphere, latitude 40.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 49% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 30/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
A gas turbine here also runs ~0% below its ISO (15°C) rating at this annual mean (typical CCGT curve, estimate).
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #7 largest gas power plant of 13 in Portugal by capacity.
Portugal has 13 gas power plants in this dataset, together about 4,359 MW of capacity.
Coordinates 40.686, -8.5894 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Setubal Mill power station is a 80 MW gas power plant in Aveiro, Portugal, commissioned in 2009.
Its output is enough to supply roughly 90,102 homes (estimated).
Setubal Mill power station is operated by The Navigator Co [100%].
