Wind power plant in Bahia, Brazil. Approximate location -14.1473, -42.7119.
WindBahiaBrazil
Seraíma is a 30.2 MW wind power plant in Bahia, Brazil. Based on its capacity (estimated), it can supply roughly 26k homes (estimated). It ranks #600 of 2,572 Brazil power plants by installed capacity. Commissioned in 2014, it is around 12 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 15.7% of Brazil's electricity; the national grid averages 110 gCO₂/kWh (88.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id BRA0030546.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI GPPD; fuel: WRI GPPD
At 30.2 MW, Seraíma is well above the median wind plant in Brazil (27.2 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a tropical savanna climate (Köppen Aw) — Southern Hemisphere, latitude 14.1°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #43 largest wind power plant of 412 in Brazil by capacity.
Brazil has 412 wind power plants in this dataset, together about 10,300 MW of capacity.
Coordinates -14.1473, -42.7119 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Seraíma is a 30.2 MW wind power plant in Bahia, Brazil, commissioned in 2014.
Its output is enough to supply roughly 25,699 homes (estimated).
