Hydro power plant in Rondonia, Brazil. Approximate location -8.8011, -63.9497.
HydroRondoniaBrazil
Santo Antônio is a 3,568 MW hydro power station in Rondonia, Brazil. It is operated by Santo Antônio Energia (Madeira Energia / Furnas-led). Based on its capacity (estimated), it can supply roughly 3.6 million homes (estimated). It ranks #5 of 2,572 Brazil power plants by installed capacity. Commissioned in 2012, it is around 14 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 51.8% of Brazil's electricity; the national grid averages 110 gCO₂/kWh (88.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id BRA0029707.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000604343); fuel: WRI source-record fuel
At 3,568 MW, Santo Antônio is well above the median hydro plant in Brazil (12 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Santo Antônio Energia (Madeira Energia / Furnas-led).
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a tropical monsoon climate (Köppen Am) — Southern Hemisphere, latitude 8.8°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #5 largest hydro power plant of 701 in Brazil by capacity.
Brazil has 701 hydro power plants in this dataset, together about 105,987 MW of capacity.
Coordinates -8.8011, -63.9497 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Santo Antônio is a 3,568 MW source-record hydro power plant in Rondonia, Brazil, commissioned in 2012.
Its output is enough to supply roughly 3,572,077 homes (estimated).
Santo Antônio is operated by Santo Antônio Energia (Madeira Energia / Furnas-led).
