Racecourse Mill is a 4 MW biomass power plant in Queensland, Australia. It is operated by Mackay Sugar Limited. Based on reported annual generation of 1 GWh, it can supply roughly 342 homes. It ranks #461 of 536 Australia power plants by installed capacity. In context, biomass supplies about 1.1% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000493.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 4 MW, Racecourse Mill is below the median biomass plant in Australia (18 MW). Biomass plants burn organic material such as wood, residues or waste-derived fuel to raise steam; they are dispatchable and counted as low-carbon where the feedstock is sustainably sourced.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Mackay Sugar Limited.
This biomass plant burns organic material (wood, residues) to raise steam for a turbine. It sits in a humid subtropical (dry winter) climate (Köppen Cwa) — Southern Hemisphere, latitude 21.2°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 99% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 13/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #28 largest biomass power plant of 31 in Australia by capacity.
Australia has 31 biomass power plants in this dataset, together about 720 MW of capacity.
Coordinates -21.1635, 149.1344 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Racecourse Mill is a 4 MW source-record biomass power plant in Queensland, Australia.
Racecourse Mill generates about 1 GWh of electricity per year.
Its output is enough to supply roughly 342 homes.
Racecourse Mill is operated by Mackay Sugar Limited.
