Hydro power plant in Gyeonggi-do, South Korea. Approximate location 37.5286, 127.2803.
HydroGyeonggi-doSouth Koreaconventional storage
Paldang is a 120 MW hydro power station in Gyeonggi-do, South Korea. It is operated by Korea Hydro and Nuclear. Based on its capacity (estimated), it can supply roughly 120k homes (estimated). It ranks #123 of 216 South Korea power plants by installed capacity. Commissioned in 1973, it is around 53 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 0.6% of South Korea's electricity; the national grid averages 417 gCO₂/kWh (40.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1000222.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000603331); fuel: WRI source-record fuel
At 120 MW, Paldang is well above the median hydro plant in South Korea (35 MW). Technically it is described as conventional storage. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Korea Hydro and Nuclear. All plants by this company →
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a monsoon hot-summer continental climate (Köppen Dwa) — Northern Hemisphere, latitude 37.5°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 30% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 68/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #10 largest hydro power plant of 36 in South Korea by capacity.
South Korea has 36 hydro power plants in this dataset, together about 6,216 MW of capacity.
Coordinates 37.5286, 127.2803 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Paldang is a 120 MW source-record hydro power plant in Gyeonggi-do, South Korea, commissioned in 1973.
Its output is enough to supply roughly 120,137 homes (estimated).
Paldang is operated by Korea Hydro and Nuclear.
