NASIK TPP PH 1 is a 1,350 MW coal power station in Maharashtra, India. Based on its capacity (estimated), it can supply roughly 1.7 million homes (estimated). It ranks #198 of 2,225 India power plants by installed capacity. Commissioned in 2016, it is around 10 years old — relatively modern. In context, coal supplies about 70.8% of India's electricity; the national grid averages 670 gCO₂/kWh (26.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id IND0000293.
Data status
Known data
Calculated from dataset
Not available
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
Data provenance
Capacity and fuel are the upstream open-dataset record, not yet matched to a 2026 registry or GEM entry.
capacity: WRI GPPD; fuel: WRI GPPD
In context: how this plant compares
At 1,350 MW, NASIK TPP PH 1 is well above the median coal plant in India (1,000 MW). Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Key facts
- Share of India coal capacity
- 0.2% of 805,419 MW across 713 plants in this dataset
- Age among peers
- 294 of 354 dated coal plants in India are older
Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).
Reported generation trend
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
Local climate & thermal context
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a tropical savanna climate (Köppen Aw) — Northern Hemisphere, latitude 20.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
Site climate & environmental severity
This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
How it compares & nearby plants
The #178 largest coal power plant of 713 in India by capacity.
India has 713 coal power plants in this dataset, together about 805,419 MW of capacity.
Nearby power plants
- NASIK · Coal · 630 MW · Maharashtra
- Shree Nashik Wind Farm · Wind · 10.5 MW · Maharashtra
- NASIK SINNAR · Coal · 270 MW · Maharashtra
- Enercon Sonoshi Wind Farm · Wind · 20 MW · Maharashtra
- Kombhalne · Solar · 30 MW · Maharashtra
- VAITARNA · Hydro · 60 MW · Maharashtra
Location
Coordinates 19.9817, 73.8896 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Frequently asked questions
What type of power plant is NASIK TPP PH 1?
NASIK TPP PH 1 is a 1,350 MW coal power plant in Maharashtra, India, commissioned in 2016.