Lipno II — Czech Republic

Lipno II is a 1.5 MW hydro power plant in Jihocesky, Czech Republic. It is operated by CEZ Group. Based on its capacity (estimated), it can supply roughly 1.5k homes (estimated). It ranks #330 of 481 Czech Republic power plants by installed capacity. Commissioned in 1957, it is around 69 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 2.3% of Czech Republic's electricity; the national grid averages 401 gCO₂/kWh (59.2% low-carbon) (2025).

Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1019183.

Capacity provenance

The public capacity above is the current source-record value. A 2026 tracker candidate lists 120 MW for Lipno I hydroelectric plant, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).

Data provenance

Source of the capacity and fuel values:

capacity: GEM · 2026 · L100000601468; fuel: WRI GPPD

In context: how this plant compares

At 1.5 MW, Lipno II is below the median hydro plant in Czech Republic (144 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Share of Czech Republic hydro capacity

less than 0.1% of 1,815 MW across 8 plants in this dataset

Age among peers

3 of 8 dated hydro plants in Czech Republic are older

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Capacity vs largest hydro plants in Czech Republic

Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by CEZ Group. All plants by this company →

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 48.6°N — which shapes how much energy it can produce and how its output varies through the year.

Monthly mean temperature

Heating degree-days here run 72% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 87/100 — this site sits in the top third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #8 largest hydro power plant of 8 in Czech Republic by capacity.

Czech Republic has 8 hydro power plants in this dataset, together about 1,815 MW of capacity.

Nearby power plants

• Lipno I · Hydro · 120 MW · Jihocesky
• Frymburk Solar Power Plant · Solar · 4.2 MW · Jihocesky
• Světlík Solar Power Plant · Solar · 2.1 MW · Jihocesky
• Plánička Solar Power Plant · Solar · 1.3 MW · Jihocesky
• Dolní Dvořiště Solar Power Plant · Solar · 1.6 MW · Jihocesky
• Kaplice Solar Power Plant · Solar · 2.4 MW · Jihocesky

Location

Coordinates 48.6333, 14.2375 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions