Home / Oceania / Australia / Laverton

Laverton — Australia

Oil power plant in Western Australia, Australia. Approximate location -28.6216, 122.3965.

OilWestern AustraliaAustralia

Laverton is a 1.5 MW oil power plant in Western Australia, Australia. It is operated by Energy Developments. Based on reported annual generation of 4 GWh, it can supply roughly 1.2k homes. It ranks #500 of 536 Australia power plants by installed capacity. In context, oil supplies about 2.2% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).

1.5MW installed capacity
4GWh reported / yr
1,171homes powered

Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000371.

Data status

Known data

FacilityLaverton WRI
CountryAustralia · Western Australia WRI
Coordinates-28.6216, 122.3965 WRI
FuelOil WRI
MW installed capacity1.5 MW WRI GPPD; source record
OwnerEnergy Developments WRI
GWh reported / yr4 GWh·a⁻¹ WRI

Calculated from dataset

CO₂ emissions3,075 t CO₂·a⁻¹ calculated
Capacity rank in country#500 / 536 calculated
Fuel-specific rank in country#33 / 46 calculated
Capacity vs country/fuel peers0.17× · 8.6 MW · n=46 calculated
Homes-powered equivalent1,171 calculated from reported generation
Climate20.2°C · HDD 599 derived from coordinates
Environmental severityC1 · 40/100 derived from coordinates

Not available

CommissionedNot available not in dataset
TechnologyNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Capacity and fuel are the upstream open-dataset record, not yet matched to a 2026 registry or GEM entry.

capacity: WRI GPPD; fuel: WRI GPPD

In context: how this plant compares

At 1.5 MW, Laverton is below the median oil plant in Australia (8.6 MW). Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Load factor
31%, from 4 GWh of reported generation; the median for 14 oil plants in Australia that report generation is 24%
Generation trend
5 GWh in 2013 and 4 GWh in 2018 (−13%)
Highest and lowest year
2013: 5 GWh; 2014: 4 GWh
Share of Australia oil capacity
less than 0.1% of 1,605 MW across 46 plants in this dataset

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 5 GWh20132014: 4 GWh20142015: 4 GWh20152016: 4 GWh20162017: 4 GWh20172018: 4 GWh20185 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Local climate & thermal context

This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a hot desert climate (Köppen BWh) — Southern Hemisphere, latitude 28.6°S — which shapes how much energy it can produce and how its output varies through the year.

20.2°Cannual mean temp
599heating degree-days (base 18°C)
1,392cooling degree-days (base 18°C)
452 melevation

Monthly mean temperature

J: 28 °CJF: 27 °CFM: 25 °CMA: 21 °CAM: 16 °CMJ: 12 °CJJ: 12 °CJA: 13 °CAS: 17 °CSO: 21 °CON: 24 °CND: 27 °CD28 °C

Heating degree-days here run 76% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 22/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.

C1ISO 9223 corrosivity (indicative)
40/100environmental-severity index
16.7°Cseasonal temperature swing
511 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #33 largest oil power plant of 46 in Australia by capacity.

Australia has 46 oil power plants in this dataset, together about 1,605 MW of capacity.

Nearby power plants

Location

Coordinates -28.6216, 122.3965 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Laverton?

Laverton is a 1.5 MW oil power plant in Western Australia, Australia.

How much electricity does Laverton generate?

Laverton generates about 4 GWh of electricity per year.

Who operates Laverton?

Laverton is operated by Energy Developments.

Built from open public data; no personal information. Operate this site? Request a correction or removal.